Pointmaker CPN-5800 - Manual (Page 92)

Page 86 - Pointmaker CPN-5800 Color Video Marker Boeckeler Instruments, Inc.
Clearing Markers Section Four: Using Markers
From the Digitizing Tablet
Press the tip button on the UNDO icon located on the tablet Menu Strip.
The most recently anchored marker disappears. An active pointer remains on
screen unless the pointer has been disengaged.
NOTE: You can undo markers even if you are in PC Mode.
From Other Controllers
Activate the Undo command for your particular controller.
The most recently anchored marker disappears. An active pointer remains on
screen unless the pointer has been disengaged.
Erasing Markers
Follow these instructions to erase markers from the overlay, wiping them clear like
a traditional eraser. You activate Erase mode from the menu system, but you erase
the markers using your drawing device.
When you are in Erase mode, you can no longer undo markers. Conversely, when
you are in Undo Mode, you cannot erase markers.
NOTE: Entering Erase mode clears markers from any overlays that you might
have stored.
Activating Erase Mode
1. Activate the menu system (see Activating the Menu, on page 29).
The Main Menu appears (see Figure 3-1, Main Menu, on page 30).
2. Select the ANNOTATION option
The Annotation menu appears (see Figure 3-3, Annotation Menu, on page 34).
3. Select ERASE METHOD.