Drylam Fujipla PLS3311 - Manual (Page 6)

AL-MEISTER PLS3311 INSTRUCTION MANUAL
REQUIREMENTS OF PAPER TO BE LAMINATED
Do not laminate:
・ Paper money or valuable securities
・ Paper with staples
・ Material that is affected by heat such as vinyl chloride or polyethylene
・ Very precious articles that are unique and irreplaceable
・ Paper thicker than 0.02” (including film thickness)
・ Paper that discolors and changes with heat such as thermal papers and crayoned pictures
・ Paper that contains a lot of moisture
・ Things other than paper
CLEANING
Be sure that the machine is unplugged. Before cleaning the machine, turn off the power and let the machine
cool down. Wipe off stains with a soft cloth. When stains are persistent, use a firmly squeezed soft cloth soaked
in a small quantity of water and detergent. Wipe off the residue of detergent with a cloth soaked in water.
USEFUL INFORMATION – FILM END
Fujipla’s exclusive PLUSTER FILM has a special feature that allows the machine to detect the end of the film.
Because the last 20” of the film is black a lamination, or ‘film end’ error will be displayed and operation will stop
immediately. Always prepare more prints than are necessary for the run to avoid the black section from
appearing on the last document. Regularly check the remaining amount of film on the display (see section 5-4).