Drylam Fujipla PLS3311 User Manual

Page 54

AL-MEISTER PLS3311 INSTRUCTION MANUAL

・

Press [RESET] key.

PROBLEM

CHECK IF

SOLUTION

PAGE

● FEEDING ERROR

Paper is stuck between the
feeder section and the
lamination section.

・

Open the feeder cover.

・

Remove all the jammed

paper.

・

Press [RESET] key.

CAUTION ・Laminating rollers
get hot. Be careful not to get
burned.

● DISCHARGE ERROR

Laminated paper is stuck in
the lamination section and/or
the cutter section.

・

Open the feeder cover and

the cutter cover. ・Remove
the jammed paper by using
the manual feed switch.

・

Press [RESET] key.

・

CAUTION Laminating

rollers get hot. Be careful not
to get burned.

・

Be careful that your fingers

or clothes do not get caught in
the rollers.

Heating roller lever or Pull
roller lever is in UP position.

・

Turn the pull roller lever

and heating roller lever to
DOWN position. ・Press
[RESET] key.