Drylam Fujipla PLS3311 User Manual
Page 56
AL-MEISTER PLS3311 INSTRUCTION MANUAL
● TEMP. SENSOR
・
Turn off the power.
SHORT (short- circuited)
・
Contact your dealer.
ERROR
・
CAUTION Do not dismantle
the machine.
-
● MAIN MOTOR ERROR
・
Turn off the power. Then
turn the power back on.
Normally the problem will be
solved.
-
・
If this problem occurs many
times, contact your dealer.
PROBLEM
CHECK IF
SOLUTION
PAGE
● Blade does not cut well.
・
Blade may be worn out.
・
Contact your dealer.
CAUTION ・Do not dismantle
the machine.
-
● Paper and/or film has
been entangled on the
heating roller.
・
Turn the heating roller lever
to UP position. ・Remove
paper and/or film carefully by
using the manual feed switch.
This switch can work only
when all the covers are
closed. Repeat the manual
feed forward or backward
until the paper and/or film is
removed. ・If glue has stuck
to the rollers, wipe it off.
14
50
● The laminated film has
creases.
Film Tension Knob is too
loose.
・
Tighten the film tension.