Drylam Fujipla PLS3311 User Manual

Page 26

AL-MEISTER PLS3311 INSTRUCTION MANUAL

4-4. ADJUST REAR EXIT TRAY

4-5. START LAMINATION

CAUTION

・

Open the front cover. Check that the heating roller lever and the pull roller lever are both in the

down position.

・

Check that the feeder cover, film cover, and cutter cover are closed.

Check settings. Check that the READY lamp lights. Check that the display shows “READY”.

Press START key. Lamination starts.

NOTE: To adjust curling, refer to 5-12 ADJUST CURLING.