Drylam Fujipla PLS3311 - Manual (Page 22)

AL-MEISTER PLS3311 INSTRUCTION MANUAL
5 Remove Film Guide Bar.
To remove the guide bar, push the bar to one side to depress the spring. The other side of the
guide bar should now be free, and allow the bar to be lifted out of the machine.
CAUTION ・Heating rollers and guide bar may be HOT!
.
6 Pull out about 20” of film. NOTE ・PLUSTER FILM must be set in the right direction (feeding off
the bottom of the roll), otherwise adhesive will get on the rollers.
7 Stick the film end to the paper as shown in the picture. The film adhesive is melted and easily