Drylam Fujipla PLS3311 User Manual
Page 37
AL-MEISTER PLS3311 INSTRUCTION MANUAL
5
Press [MODE] key again to confirm.
The display returns to the initial display or the warm-up display when no keys are pressed for 5
sec.
This value is retained in memory even after power off.
5-8. SET COUNTER
Set the number you want to laminate on SET COUNTER mode.
1
Press [MODE] key.
2
Select SET COUNT by pressing [UP] or [DOWN] scroll key.
3
Press [MODE] key.
This display appears.
NOTE
• The default is set to FREE.