Drylam Fujipla PLS3311 User Manual
Page 36
AL-MEISTER PLS3311 INSTRUCTION MANUAL
5-7. ADJUST PAPER OVERLAP (while not running)
When the display shows OVERLAP ERROR, adjust the amount of paper overlap on PAPER OVERLAP
mode.
1
Press [MODE] key.
2
Select PAPER OVERLAP by pressing [UP] or [DOWN] scroll key.
3
Press [MODE] key.
This display appears.
NOTE
• The default is set to 0.00”.
4
Select the value you want by pressing [UP]
or [DOWN] scroll key.
NOTE ・Overlap can be adjusted within the
range of +/- 0.32”.
・
The scale 0.04 means approximately 0.04”. This amount is subject to paper and settings.