Drylam Fujipla PLS3311 User Manual
Page 20
AL-MEISTER PLS3311 INSTRUCTION MANUAL
3
Place a few sheets of paper in the Feeder Tray so that the position is flush at the center of the
paper and the center mark of the feeder Tray. Fix both paper guides. Make sure that the paper is
touching the entrance.
Put Feeder Guard up against the
paper.
NOTE ・It is recommended to set paper that is the same type and the same size as the actual
material you wish to laminate and to do test laminations first. CAUTION ・Before opening the
feeder cover, remove any papers from the feeder tray first.
4-3. SETTING FILM
1
Even when the machine is warmed up, the display “NOT READY” will appear. The film can be set
at this point.