Drylam Fujipla PLS3311 User Manual
Page 46
AL-MEISTER PLS3311 INSTRUCTION MANUAL
5-12. DE-CURLING
1
Turn the pull roller lever to the UP position. The heating roller stays in the DOWN position.
Pull and move the de-curling lever to the position you want. By leasing the lever it will lock into
place.
It is recommended to start lamination setting the de-curling Lever to the center “0”. The amount
of de-curling will increase with the lever towards the left side.
Thinner paper to the left (more positive, or more de-curl)
Thicker paper to the right (more negative, or less de-curl)
NOTE:
Hot lamination has a tendency to curl upwards, therefore more de-curl will necessary.