Drylam Fujipla PLS3311 - Manual (Page 34)

AL-MEISTER PLS3311 INSTRUCTION MANUAL
3
Press [MODE] key.
The film lot number is displayed.
4
Press [MODE] key again to return to the initial display. The display returns to the initial display or
the warm-up display when no keys are pressed for 5 sec.
5-6. SET CUT TIMING
When “CUTTING ERROR” is displayed, adjust the cutting position by setting the CUT TIMING parameter.
1
Press [MODE] key.
2
Select CUT TIMING by pressing [UP] or [DOWN] scroll key.