Drylam Fujipla PLS3311 - Manual (Page 31)

AL-MEISTER PLS3311 INSTRUCTION MANUAL
NOTE
• The speed setting range is from 40~120”/min.
5-3. ADJUST PAPER OVERLAP (during operation)
1
Press [TEMP/SPEED] key three times.
This display appears.
NOTE
• The initial value is set at 0.00”.
2
Select the value you want by pressing [UP] or [DOWN] scroll key. The amount of overlap can be
set in increments of 0.04 and vice versa.
3
Press [TEMP/SPEED] key again to confirm.
When no keys are pressed for 10 seconds,
the set value is confirmed and the display returns to the initial display or the warm-up
display.
NOTE
• Overlap can be adjusted within the range of +/- 0.32.
• The amount of overlap can be set in increments of 0.04 and vice versa. The scale 0.04
means approximately 0.04”. This amount is subject to paper and settings.