Drylam Fujipla PLS3311 User Manual

Page 57

AL-MEISTER PLS3311 INSTRUCTION MANUAL

● [NOT READY] appears
on the display and cannot
clear.

After solving problems, [NOT
READY] appears.

・

Remove paper in the

machine. Set film again.

● More than two sheets
are transported at one
time.

Each sheet of paper is too
tightly stacked.

・

Hold the stack of paper

vertically and tamp it down
and fan the paper well. Even it
up.

Paper is curling.

・

De-curl paper.

・

Adjust the feeding

pressure.

PROBLEM

CHECK IF

SOLUTION

PAGE

● Paper in the feeder tray
is not picked up.

Due to paper not being pulled
by the feeding roller.

・

Open the feeder cover and

inspect for any debris. Also,
clean the rollers.

Due to too much resistance by
the paper pressure lever

・

Lower the paper pressure

lever

Paper is curling.

・

Be certain paper lies flat

before placing it on the
Feeder Tray.