Drylam Fujipla PLS3311 User Manual

Page 24

AL-MEISTER PLS3311 INSTRUCTION MANUAL

10 Close the feeder cover while holding the paper end as shown in the picture. NOTE: Make sure

that the paper stays flat, or underneath the lip of the feeder.

11 Turn Pull Roller lever to UP position

Move De-curling lever to center “0” position.

Then, turn Pull Roller Lever to DOWN position again.

NOTE:

• While the Pull Roller Lever is in the UP position pull and move the de-curling Lever to the

position you want. By releasing the lever it will be locked into place.

• For paper thicker than 0.043lbs/ft2 it is recommended to keep de-curling Lever at FREE

position for test lamination.

• Make sure the Pull Roller Lever is in the UP position when you move the de-curling Lever.

Close the film cover.
Load some paper on the Feeder Tray
Press the FILM SETTING switch.