Drylam Fujipla PLS3311 User Manual
Page 21
AL-MEISTER PLS3311 INSTRUCTION MANUAL
2
Make sure that:
A) Place the heating roller lever and the pull roller lever are in the down position.
B) Set the de-curling lever in the position marked FREE at the right end of the scale.
C) Press FILM SETTING switch. NOTE ・The first paper is picked up and fed.
3
When the first paper comes to a stop remove any remaining paper from the Feeder Tray (you
may leave the tray on the machine, if you wish) and open both the Film and Feeder Covers.
4
Hold the film roll and place both film ends on the upper film rack (above the socket where the
film sits in normal operation). This places it out of the way which aids in threading the machine.
NOTE ・The display shows FILM ERROR when you remove the film roll. This is normal. It will go
back to its original display when the film roll is set in its proper operating position.