Dataman 48XP - Manual (Page 60)

60
DATAMAN-48XP not found!
The DATAMAN-48XP software does not detect the
DATAMAN-48XP on any of the parallel ports, or the
DATAMAN-48XP may have failed and requires to be repair.
Make sure the power on the DATAMAN-48XP is on. Also check the
parallel connection between the PC and the DATAMAN-48XP. If
the DATAMAN-48XP shares the parallel port with another device,
remove the other device or move the DATAMAN-48XP to its own
port.
DATAMAN-48XP power off or disconnected from PC!
The DATAMAN-48XP software has not detected the
DATAMAN-48XP on any of the parallel ports.
Make sure the power on the DATAMAN-48XP is on. Also check the
parallel connection between the PC and the DATAMAN-48XP. If
the DATAMAN-48XP shares the parallel port with another device,
remove the other device or move the DATAMAN-48XP to its own
port.
MOS Technology hex file can be 64KB maximum!
This error is displayed when you want to save the buffer to a file,
and the buffer is bigger than 64KB.
The buffer can still be saved to disk, but only the first 64 KB will be
saved. The rest will be lost. Choose another file format if you need
to save the whole buffer.
Manufacturer’s Code unmatched!
This error message is returned when the DATAMAN-48XP does a
device ID check.
The device code found on the device is not as expected. You might