Dataman 48XP - Manual (Page 35)

35
Figure 4-5 Device verification screen
Memory Protect/program configuration
Menu Device / Memory Protect
Hot key ALT-U (PLD only)
This function is a device-specific command; it appears on the
main menu only when chips that have this capability are
selected.
For example GAL, CEPAL, Microprocessor, and some Flash
memory, this function must be configured before use. When
you have enabled the configuration (ALT-G), you can set the
desired value and status in the buffer then performing this
command will program the configuration data into the chips,
most users will program the main memory first then program
the configuration (two steps). However in Mass production
mode, the user can enable the memory protect / program
configuration in the device operation menu, after the main
memory buffer has been loaded and configuration byte data has