Dataman 48XP - Manual (Page 3)

3
programmed by DATAMAN-48XP within 80 seconds). An
experienced operator can program thousands of high-density
chips per day.
Device-insertion and continuity checks – No mistakes!
The DATAMAN-48XP performs device-insertion and
continuity checks before programming each device. It can
detect poor pin contact, upside-down device insertion, incorrect
position, and pin number mismatch. This function prevents
expensive chip damage caused by operator error.
Auto-sensing and self-programming
The DATAMAN-48XP has implemented patented technology
to meet mass-production requirements. When a chip is inserted
into the ZIF socket, the DATAMAN-48XP will start to program
automatically, the operator just needs to follow the LEDs to
know when to remove the chip and insert a new one without
them needing to press any keys.
Project file “Save and Load”
You can save the program configuration project to a file that
contains the device selection, the buffer data, and all of the
program setup options. This file can be recalled at any time for
future use without having to go through the setup procedure
again. This allows you to pass your design file to the
production department without mistakes.
Variable VCC with one or two-pass verification
The DATAMAN-48XP allows users to select the verification
voltage after programming is complete, e.g., Vcc +/-5%,
V
cc
+/-10%, Vcc can range from 2V to 7.5V. Verification
ensures that the chips have been properly programmed with no
data retention problems.