Dataman 48XP - Manual (Page 2)

2
Introduction
The DATAMAN-48XP is an intelligent high performance,
PC-based universal programmer that works through your PC
′
s
parallel port. It features a 48-pin ZIF socket and supports many
of the programmable chips on the market. These include CPLD,
EPROM, EEPOM, Serial EEPROM, Flash memory and MCU.
The D48XP has an extremely high throughput, supports both
5V and 3V devices in both Vcc and I/O. Lower voltage chips
(for example 1.8V Vcc and I/O) can also be programmed
through a special adapter. Device insertion and continuity
checks are also part of the PC-based design. Device support
updates are issued through our software, giving our customers
quick and easy access to new device support without hardware
upgrades.
Features
Universal adapter up to 48 pin
The DATAMAN-48XP is designed to meet your future needs in
high density Flash chips. Using the resources of your PC, it
supports 32K bit up to over 1G bit memory chips without
upgrading its hardware. The DATAMAN-48XP also has
universal adapters that accommodate 48-pin TSOP, 44-pin
PLCC, 40-pin TSOP or 32-pin TSOP packages. Each adaptor
supports all the chips in a package regardless of pin swapping.
This is possible due to the universal pin driver technology on
the DATAMAN-48XP, eliminating the need to buy multiple
adapters and saving you money.
Unbeatable speed
The DATAMAN-48XP
′
s on-board intelligence reduces system
overhead to a minimum. It can program Flash devices within
2.5 seconds per Mbit (for example, AMD29DL323 can be