Auto format detected, From file to buffer, To buffer – Dataman 48XP User Manual

Page 17: From file address

Filename This specifies the file name and its destination

Auto Format Detected

The software automatically detects the format of the file that

is to be loaded. If the desired format of the file is different

from the format detected, select the correct file format by

moving the cursor to the selection menu and changing it to

the desired file format. Available file formats include: Binary,

HP64000ABS, Intel Hex, MOS Tech Hex, Motorola S

format, TEK Hex, and Straight Hex.

From File to Buffer

This option indicates which bytes must be read from the

input file. By default it will load the entire file into the buffer.

You can specify that the file be loaded in the following ways:

Even (loads the even bytes into the buffer), Odd (loads the

odd bytes into the buffer), also 1

byte of 4, 2

byte of 4, 3

byte of 4, 4

byte of 4. For details, see the “Save Buffer to

File” section of this manual.

To Buffer

This option indicates where the previously read byte is to be

written. This enables you to ‘build’ the memory buffer from

several files. By default, the whole file will be loaded into

the buffer. Even means the file will be loaded as every even

byte in the buffer. Odd means the file will be loaded as every

odd byte in the buffer. The other options are 1

of 4 byte, 2

of 4 byte, 3

of the 4 byte, and 4

of the 4 byte.

From File Address

Only a selected range of the file will be loaded into the

buffer, enter the address that contains the first byte into this

box, this is the starting address of the section of the file to be

loaded.