Dataman 48XP - Manual (Page 39)

39
Options
Modify Programming Parameters
Menu Options / parameters modify
Hot key F3
This function allows a user to modify the programming
parameters of the chip being programmed. With the
programming parameters for the selected chip appearing on
screen, the user activates the “modify algorithm screen” and
changes the parameters by moving the cursor to the
corresponding field and changing the value to the desired value.
If a value entered exceeds the allowable limits for a given
parameter, a warning will be displayed, together with allowable
limits, after the user attempts to confirm the setting by pressing
“OK”.
Warning: Only experienced users should use this option, as it
can damage the device if the voltage exceeds the Max tolerance
of the device.
As the programming parameters are for temporary use only,
they cannot be saved. After you select a new device or exit the
DATAMAN-48XP software the original parameters will
automatically be restored.
Device Operation Options
Menu Options / Operation options
Hot key F4