Dataman 48XP - Manual (Page 59)

59
Device inserted backwards or damaged already!
The DATAMAN-48XP detected that the device has been inserted
the wrong way round, or that the device has been damaged.
Verify that the device has been inserted correctly. If not, try another
device to verify that you are using the correct algorithm etc. to
program the device.
Device inserted upwards %d slot(s)!
The DATAMAN-48XP has detected that the device has been
inserted incorrectly. Remove the device and insert it correctly.
Device insertion error or damaged already!
The DATAMAN-48XP detected a device in socket, but several pins
do not respond as expected (poor contact). This indicates that a
device has been inserted incorrectly or that the device has been
damaged. Verify that the device has been inserted correctly. If not,
try another device to verify that you are using the correct algorithm
etc. to program the device.
File write error!
The DATAMAN-48XP detected an error when writing a file to disk.
Check that there is enough space on the disk to hold the file. Also
check that the disk is not write-protected.
This might happen on a network if you are a user that does not have
rights to the directory you want to save the file to. Use another
directory or disk.
Function code has not been initialized yet!
This message indicates that the data file is corrupt. We suggest a
re-install of the DATAMAN-48XP software and removal of all the
DATAMAN-48XP files on your hard disk before installation.