Dataman 48XP - Manual (Page 33)

33
Blank Checking a Device
Menu Device / Blank Check
Hot key Alt-B
This option checks if the active device is in its erased state. It
will return a message stating “Device not blank!” at the first
occurrence of data in the device. The address where the data is
found will also be displayed.
Reading a Device
Menu Device / Read
Hot key Alt-R
This option reads a master chip into the memory buffer for
duplication of a master chip. Prior to executing this command,
the chip must be selected in the software, and then a
corresponding chip should be inserted into the socket to be
programmed.
Programming a Device
Menu Device / Program / Auto
Hot key Alt-P
This option programs the active device with the contents of the
memory buffer, when the programming is complete,
verification will take place. The type of verification depends on
the “verification options” set in the options | Operation menu.