Dataman 48XP - Manual (Page 38)

38
compare command is to compare the buffer data with the
device data, when the first data difference is found, the
software will stop and report the difference between the data in
the buffer and the data in the device, pressing the next button in
the software screen will continue the compare process.
Device Configuration
Menu Device / Configuration
Hot key Alt-G
This function is a device-specific command for devices with
configuration registers available in the chip, a configuration
register is used as a special function register for the chip, it
changes the behavior of the chip such as, OSC type, watch dog
enable, code protection, and other functions. To write the
configuration register into the chip, edit the configuration menu
to your desired value then perform memory protect/ program
configuration.
Figure 4-6 Example of device-specific configuration screen