Dataman 48XP - Manual (Page 22)

22
pin PLCC chip into a 40 pin DIP (emulate the 44 pin PLCC as
a 40 pin DIP), you can select the 89C51 in device selection and
use this 3
rd
party adapter.
Other useful examples in device, package and adapter.
1) For example a 1M bit flash (29F010), this chip has three
kinds of package, 32 pin DIP, 32 pin PLCC and 32 pin
TSOP, in the DATAMAN-48XP software, it is only
available in DIP package under device selection, to
program a 32 PLCC chip, you will need a 32 pin DIP to 32
pin PLCC one to one pin swap adapter (PLCC 3232-11),
for 32 pin TSOP, you will need a SDP-UNIV-32TS.
2) For example, a GAL22V10 chip, this chip has two
packages (24 pin DIP or 28 pin PLCC),
DATAMAN-48XP only shows 24 pin DIP in device
selection, to program the 28 pin PLCC, a 28 pin PLCC
to 24 pin DIP adapter to emulate the 24 pin DIP chip is
required (PLCC 2824-04).
3) 27C128/256 EPROM chip, this chip is available in 28
pin DIP and 32 pin PLCC, to program the 32 pin PLCC,
you need a 32 pin PLCC to 28 pin DIP adapter, it
emulates the 32 pin PLCC as a 28 pin DIP, this adapter
is PLCC 3228-11.
4) Other SOIC chips may have the DIP/SOIC package, if
the chip has the same pin out and pin count in DIP and
SOIC, select the DIP with universal SOIC adapter
which will program the SOIC chip (for example
Pic16F73 with SDP-UNIV-28SO/300 adapter will
program a 16F73 SOIC chip).