Dataman 48XP - Manual (Page 23)

23
1. Select the type of device that will be the active device.
Mouse
Click on “All”, “EPROM” or “MPU”.
Keyboard
Press TAB until the cursor is flashing in the “Type” box.
Use the up and down arrows to go to the appropriate type.
Press the space bar to select the type.
2. Enter the part number, the manufacturer number, or parts of
both in the “Search” box.
Mouse
Click on “Search”. Type in the characters.
Keyboard
Press TAB until the cursor flashes in the “Search” box.
Type in the known characters. All the devices that satisfy
this partial information will be displayed. Use the mouse to
select a device, and click “OK”. If you are not using a
mouse, use the TAB key to skip between the various
screens, and use the arrow keys to move around in each
screen.
Auto Select EPROM
Menu Device/ Auto Select EPROM
Hot key Alt-A
This function allows the user to detect which EPROM/Flash
chip has been inserted in the DATAMAN-48XP ZIF socket, all
the EPROM or Flash memory devices have a manufacturers ID
and device ID in the chips (hardware ID). When performing
this function, the DATAMAN-48XP applies a 12V high voltage
to the A9 location on the chip, then reads back the chip’s