4 read event results – Casella CEL CEL-368 User Manual
Page 73
3.
Use
and
to step either way through the period
identities to display the whole period profile saved in THIS store.
4.
When it is required to display period results for a logging run
saved in ANOTHER store, press
to display the cumula-
tive results.
5.
Use
and
to step to the required store identity.
6.
Press
to display period results from the new store.
7.4
Read Event Results
Event results can be accessed at any time, except during the self-verifi-
cation and calibration sequences. Proceed as follows.
1.
When the instrument is NOT performing the self-verification or
calibration sequences, press
to display event data.
2.
When the instrument IS performing the self-verification or cali-
bration sequences, wait for the sequence to finish, then press
to display period data available from earlier logging runs.
When the instrument is logging data, results from all events up to
but EXCLUDING the current event are available. (Data calcu-
lated for an event becomes available ONLY when the event is
complete).
The identity of the STORE (logging run) in which the results either
have been or are being saved is shown, plus the identity of the
EVENT for which results are currently being displayed (shown
in the upper reverse video.
3.
Use
and
to step either way through the event
identities to display all events saved in THIS store.
CUMUL
PERIOD
EVENT
EVENT
CEL-268/368 Handbook
Page - 72