Casella CEL CEL-368 - Manual (Page 26)

legislation on recycling states that this packaging must be retained for
re-use or be recycled in the locally approved manner). Any instrument
returned inadequately packed to the manufacturers for calibration, serv-
ice, or repair will be re-packaged and charged accordingly.
The following accessories may be ordered separately to increase the
range of tasks that can be performed by the instrument.
MK-250 1 ⁄
2 " Electret Microphone (for outdoor monitoring
or damp conditions with CEL-268),
MK-301 1 ⁄
4 " Condenser Microphone (for increased CEL-
268 frequency and measurement ranges),
CEL-216 Line Input Adaptor and Dummy Microphone for
CEL-268,
CEL-316 Line Input Adaptor and Dummy Microphone for
CEL-368,
CEL-282 Class 2L Acoustic Calibrator for CEL-368,
CEL-284/2 Class 1L Acoustic Calibrator for CEL-268,
CEL-2962 Windshield for CEL-268,
CEL-4672/2 Windshield for CEL-368,
CEL-3025 Vibration Attachment, (also needs CEL-225/3
Preamplifier when used with CEL-368),
CEL-3732/2 Mains Power Supply (requires C6592/2 Cable),
CEL-4627 Tripod.
Several special cables are available as follows.
C4493/10 Preamplifier Extension Cable (10 m),
C6591/1.5 Direct connection cable (1.5 m) to Centronics
printer,
C6593/2 12 V DC Power Supply Cable (2 m) with car
cigarette lighter termination,
C6594/2 AC Output Cable (2 m) with BNC termination,
C6605/2 AC Output Cable to Sony TCD D10 DAT
Recorder (2 m), includes event triggering for
suitably modified DAT hand units.
Page 22 - CEL-268/368 Operator's Handbook