Casella CEL CEL-368 - Manual (Page 18)

1.12 Read Event Results
Event results can be accessed at any time, ex-
cept during the self-test and calibration se-
quences, by pressing
.
When the instrument is logging data, results
from all events up to but EXCLUDING the cur-
rent event are available. (Data calculated for
an event becomes available ONLY when the
event is complete).
The identity of the STORE (logging run) is
shown and the identity of the EVENT for which results are being dis-
played is shown in the upper reverse video field.
Use and to step either way through the events and display
the results saved in THIS store.
When it is required to display the events from a logging run that has
been saved in ANOTHER store, press to display the cumulative re-
sults. Use and to display the required store identity, then
press to display results for that store.
1.13 Inspect Event Graphs
When event profiles have been stored (Sec-
tion 1.7), they can be displayed by pressing
to implement the GRAPH option shown
in the lower reverse video field on the EVENT
screen.
The identity of the STORE (logging run) is
shown together with the identity of the EVENT
(which is shown in reverse video).
EVENT
CUMUL
EVENT
SELECT
Page 14 - CEL-268/368 Operator's Handbook