BINDER VD 23 - Manual (Page 80)

VDL (E2.1) 04/2014 page 80/107
Avoid the solvent accumulation in the vacuum module (option) as this would cause the vacuum
module to become an explosive area (Zone 0 or 1 or 2). The VDL vacuum drying oven located
on top of the module is not explosion-proof constructed in regards to its surroundings.
Outlet port (gas!)
Exhaust waste vapor
condenser
Cooling water inlet (hose
nozzle 6 mm / 0.23 in)
Round bottom flask as con-
densate catchpot
Cooling water outlet (hose nozzle 6 mm)
Guard plate
Carrying handle
Inlet (vacuum connection)
Figure 21: Vacuum pump VP4 (MZ2C EX)
Cooling water outlet (hose nozzle 6 mm)
Outlet port (gas!)
Exhaust waste vapor
condenser
Cooling water inlet
(hose nozzle 6 mm /
0.23 in)
Collector bottle as
condensate catchpot
Inlet
(vacuum connection)
Round bottom flask
as condensate
catchpot
Figure 22: Vacuum pump VP5 (MZ4C EX)