BINDER VD 23 - Manual (Page 46)

VDL (E2.1) 04/2014 page 46/107
Display 1 shows 0000
Display 2 shows Shiftpt. (no function)
Press program key
Display 1 shows 0000
Display 2 shows
Shiftpt. 1
(selection of the shift point)
(actual shift point: 1)
Select the shift point (1 up to 4) with key Value is shown in display 2.
Press program key
Display 1 shows e.g. --.-- (time of the selected shift point)
Display 2 shows
S1: --:--
(actual selection of the shift point: S1)
(actual setting: shift point not programmed)
Press program key
Display 1 shows --.-- (time of the selected shift point)
Display 2 shows Time
--:--
(entry of the time of the selected shift point)
(actual setting: shift point not programmed)
Enter the time (hh:mm) using arrow keys Value is shown in display 2.
Press key
Display 1 shows 0000
Display 2 shows Ch1 = SP2: Off (entry of the state of channel 1)
(actual setting: Off)
Enter the state of channel 1
(On or Off) using arrow keys
Setting is shown in display 2.
Press key
Display 1 shows 0000
Display 2 shows Channel 2: Off (entry of the state of channel 2) (no function)
(actual setting: Off)
Enter the state of channel 2
(On or Off) using arrow keys
Setting is shown in display 2.
Press key Press key EXIT
Display 1 shows e.g., 08.30 (time of the selected shift point)
Display 2 shows S1: 08:30 - - (actual selection of the shift point: S1)
(actual setting: time 08.30, channels Off)
Press program key Press key EXIT twice
Select the next shift point Select the next day of the week
To exit the menu, Press several times key EXIT or wait for 120 seconds. Controller returns to normal dis-
play.