6 overview of the zone classification of the ovens – BINDER VD 23 User Manual
Page 29
VDL (E2.1) 04/2014
page 29/107
Required measures (continuation):
•
During the drying process, use only those solvents for which the temperature setting has
been performed.
•
In the case of solvent mixtures, use the ignition temperature of the material with the lowest
ignition temperature. For the ignition temperature, refer to the safety specifications of the
solvent.
•
Let the oven cool down to ambient temperature before you start a new drying process with
a modified ignition temperature.
2.6 Overview of the zone classification of the ovens
Figure 10: Zone classification VDL 23