BINDER UF V 500 User Manual
Operating manual, Translation of the original operating manual, Binder gmbh
This manual is related to the following products:
Table of contents
Document Outline
- EC – declaration of conformity
- Certificate for the GS mark of conformity of the “Deutsche Gesetzliche Unfallversicherung e.V.“ (German Social Accident Insurance) DGUV
- Product registration
- 1. Safety
- 2. Unit description
- 3. Completeness of delivery, transportation, storage, and installation
- 4. Installation and connections
- 4.1 Operating instructions
- 4.2 Spacers for rear wall distance
- 4.3 Fixing to achieve earthquake safety (optional)
- 4.4 10 mm access port prepared to be finalized by the user (UF V (E2.1), UF V-UL (E2.1))
- 4.5 Adjustable shelves
- 4.6 Electrical connection
- 4.7 Advanced voltage booster (regular with UF V UL, option for UF V))
- 5. Start up
- 5.1 Preset factory parameters
- 5.2 Operating the automatic door mechanism
- 5.3 Door locking with key (option for UF V UL)
- 5.4 GUARD.CONTROL: RFID personal access control of the automatic door mechanism (standard for UF V, option for UF V UL)
- 5.4.1 Indication of the door condition
- 5.4.2 Overview of LED indications of the RFID personal access control
- 5.4.3 Cards for access control
- 5.4.4 Operating the RFID access control
- 5.4.5 Reading out the door opening data with the GUARD.CONTROL Reader Kit (Art. no. 8012-0789)
- 5.4.6 Resetting the entire system
- 5.5 Behavior after turning on the unit
- 6. Setting the temperature set point at the controller RP1
- 7. Placing samples in storage in the freezer
- 8. Controller RP1 operating modes
- 9. Safety controller (temperature safety device)
- 10. Indications and alarm functions (auto-diagnostic system)
- 10.1 Indications and alarm functions overview
- 10.2 Resetting the alarm messages
- 10.3 Safety controller temperature alarm
- 10.4 Temperature tolerance range alarm (too high and too low temperature)
- 10.5 Door open alarm
- 10.6 Messages from the battery management system
- 10.7 Power failure alarm
- 10.8 Temperature sensor failure
- 10.9 Further error messages
- 10.10 Zero-voltage relay alarm output
- 11. CO2 emergency cooling (option)
- 12. Data monitoring and recording
- 12.1 Ethernet interface (option)
- 12.2 Communication software APT-COM™ 3 DataControlSystem (option)
- 12.3 Analog output for temperature
- 12.4 Additional Pt 100 temperature sensor (option) with output to Lemo socket
- 12.5 Circular chart recorder (option)
- 12.6 Data logger (standard with UF V UL, option for UF V)
- 12.7 BINDER GSM Box for remote alarms (option)
- 13. Unit inventory and accessories
- 14. Maintenance, cleaning, and service
- 15. Disposal
- 16. Troubleshooting
- 17. Overview of all controller indications
- 18. Technical description
- 19. Contamination clearance certificate
- Word-Lesezeichen
- Leere Seite