BINDER UF V 500 - Manual (Page 15)

UF V (E2+E2.1) 03/2013 page 15/112
Symbol on the type plate
Information
GS mark not valid with mounted
option CO
2
emergency cooling
GS mark of conformity of the “Deutsche Gesetzliche Unfallversi-
cherung e.V. (DGUV), Fachausschuss Nahrungs- und Genussmit-
tel, Prüf- und Zertifizierungsstelle im DGUV Test“ (German Social
Accident Insurance (DGUV), Expert Committee for the food pro-
cessing industry, Testing and Certification Body in DGUV). When
mounting the optional CO
2
emergency cooling, the GS mark of
conformity is no longer valid.
LABORATORY EQUIPMENT
43KM
(UL units only) The equipment is certified by Underwriters Laboratories Inc. ® ac-
cording to standards CAN/CSA-C22.2 No. 61010-1, 2 nd Edition,
2004-07 (Electrical Equipment for Measurement, Control, and
Laboratory Use; Part 1: General Requirements); UL 61010-1, 2 nd
Edition, 2005-07-22 (Electrical Equipment for Measurement, Con-
trol, and Laboratory Use; Part 1: General Requirements)
1.5 General safety instructions on installing and operating the UF V freezer
With regard to operating the freezer and to the installation location, please observe the guideline
BGI/GUV-I 850-0 on safe working in laboratories (formerly BGR/GUV-R 120 or ZH 1/119 laboratory
guidelines issued by the employers’ liability insurance association) (for Germany).
BINDER GmbH is only responsible for the safety features of the unit provided skilled electricians or quali-
fied personnel authorized by BINDER perform all maintenance and repair, and if components relating to
chamber safety are replaced in the event of failure with original spare parts.
To operate the unit, use only original BINDER accessories or accessories from third-party suppliers au-
thorized by BINDER. The user is responsible for any risk caused by using unauthorized accessories.
CAUTION
Danger of overheating.
Damage to the unit.
∅
Do NOT install the unit in unventilated recesses.
 Ensure sufficient ventilation of the installation site for dispersal of the heat.
CAUTION
Leakage of refrigerant in the event of a unit defect.
Danger to the environment.

Ensure sufficient ventilation of the installation site.
Do not operate the freezer in hazardous locations.
DANGER
Explosion hazard.
Danger of death.
∅
Do NOT operate the unit in potentially explosive areas.
∅ KEEP explosive dust or air-solvent mixtures AWAY from the unit.