BINDER UF V 500 - Manual (Page 45)

UF V (E2+E2.1) 03/2013 page 45/112
5.4.2 Overview of LED indications of the RFID personal access control
The red, yellow, and green LEDs indicate the respective RFID control function when using the access
cards.
Initial state (RFID inactive). When the blue LED is off, open the door with
pushbutton “OPEN”.
lit
Normal mode (Master card registered, RFID active) lit
Switch-off mode (RFID inactive). When the blue LED is off, open the door
with pushbutton “OPEN”.
or
Opening mode (user card acknowledged, RFID active). Open the door with
pushbutton “OPEN”.
lit
lit
lit
User card refused
Learning mode (individual user card can be registered or cleared)
flashing 2 sec.
User card registration
flashing 2 sec.
flashing 2 sec.
An individual user card is being cleared
lit
Clearing mode (all user cards can be cleared)
flashing 2 sec.
flashing 2 sec.
All user cards are being cleared
5.4.3 Cards for access control
With each freezer unit, a master card, a switch-off card and 3 user cards (scope of delivery) are available
for access control. The system can memorize up to 60 user cards. The cards have a copy protection
related to their internal card number.
The
user cards serve to open the freezer. The user cards release the automatic door mechanism on
condition that the card number was registered in the system by means of the master card. You can open
the door with pushbutton “OPEN”.
The
master card serves to registering / clearing the card numbers in the system. A master card will not
open the chamber. In case of having lost the master card, the system can be reset to initial state with a
service unit and a code exchange with BINDER Service.
The
switch-off card serves to inactivate the RFID access control. Using the switch-off card is possible
only together with the registered master card.