BINDER UF V 500 - Manual (Page 39)

UF V (E2+E2.1) 03/2013 page 39/112
4.5 Adjustable shelves
The scope of delivery comprises three adjustable shelves. You can mount them and further optional
shelves in different positions of the lateral walls in 24 mm / 1 inch steps. In standard position, the shelves
are placed with a distance of 310mm / 12.2 in, forming the bottom of the compartments, thus making
available the maximum space for optional inventory systems.
When using the optional shelves for operation at -40 °C / -40 °F, leave a free space of 8 cm each on the
left and right side when introducing the load.
To remove a shelf, lift and incline it, then pull it forward.
It is required to fix the adjustable shelves in order to avoid that
a person could be locked in the freezer. For this purpose,
mount the supplied fixing plates as described below for each
side:
Figure 22: Fixing plate
• Use a 4 mm Allen wrench to loosen
the screws of the shelf holder bar
• Put the fixing plate below the shelf
holder bar
• Screw the fixing plate to the shelf
• Use a 4 mm Allen wrench to fix the screws of the shelf holder bar