BINDER UF V 500 - Manual (Page 25)

UF V (E2+E2.1) 03/2013 page 25/112
2.4 RP1 controller
The controller RP1 controls the temperature inside the freezer.
Figure 9: Overview controller RP1
Controller alarm and status LEDs
Symbol LED Meaning
red General alarm
yellow Intensive cooling active
red Temperature alarm
red Power failure, no battery connected, battery voltage too low
°C yellow Display of a temperature value in °C
Controller buttons
Button Function
Switch off the alarm sound, reset alarm messages, call up the previous operating
function
Reduce value
Increase value
Confirm entry and call up next operating function
Switching on / off the alarm test (switching on: press down for 5 sec. switching off:
press down briefly)