BINDER UF V 500 - Manual (Page 35)

UF V (E2+E2.1) 03/2013 page 35/112
Moving position Operating position
Figure 14: Letting down the castor locks
As soon as the castor locks have ground contact, turning becomes tight. You can use a screwdriver
(Figure 15) or set a fork wrench size 13 below the live ring (Figure 16).
Figure 15: Adjusting the castor locks
with a screwdriver
Figure 16: Adjusting the castor locks
with a fork wrench
The castors are designed only for moving the freezer inside a building (chap. 3.2.1). For transport outside
a building use technical equipment (chap. 3.2.2).
Wear suitable shoes (safety shoes) when moving the freezer or during transport.
The castor locks must be let down completely in order to be able to permanently support the
complete load (max. load see technical data, chap. 18.4).
Align the unit using a spirit level placed on the inner chamber bottom.