Altera MAX 10 Embedded Multipliers User Manual
Page 30
GUI Parameter
Parameter
Condition
Value
Description
Which multiplier-
adder implementation
should be used?
DEDICATED_
MULTIPLIER_
CIRCUITRY
—
• Use the
default
implementa‐
tion
• Use dedicated
multiplier
circuitry (Not
available for
all families)
• Use logic
elements
Specifies the
multiplier-adder
implementation.
Table 6-3: ALTMULT_ADD Parameters - Multipliers
This table lists the IP core parameters applicable to MAX 10 devices.
GUI Parameter
Parameter
Condition
Value
Description
Register input A of the
multiplier
—
—
On or Off
Turn on to enable
register input A of the
multiplier.
What is the source for
clock input?
INPUT_
REGISTER_
A[0..3]
• Input
Configuration
> Register
input A of the
multiplier =
On
• • Input
Configuration
> More
Options
Clock0–Clock3
Specifies the source for
clock input.
What is the source for
asynchronous clear
input?
INPUT_ACLR_
A[0..3]
• Input
Configuration
> Register
input A of the
multiplier =
On
• Input
Configuration
> More
Options
• Aclr0–Aclr2
• None
Specifies the source for
asynchronous clear
input.
Register input B of the
multiplier
—
—
On or Off
Turn on to enable
register input B of the
multiplier.
6-6
ALTMULT_ADD Parameter Settings
UG-M10DSP
2014.09.22
Altera Corporation
ALTMULT_ADD (Multiply-Adder) IP Core References