beautypg.com

Embedded multiplier block overview, Embedded multiplier block overview -1 – Altera MAX 10 Embedded Multipliers User Manual

Page 3

background image

Embedded Multiplier Block Overview

1

2014.09.22

UG-M10DSP

Subscribe

Send Feedback

The embedded multiplier is configured as either one 18 x 18 multiplier or two 9 x 9 multipliers. For

multiplications greater than 18 x 18, the Quartus

®

II software cascades multiple embedded multiplier

blocks together. There are no restrictions on the data width of the multiplier but the greater the data

width, the slower the multiplication process.

Figure 1-1: Embedded Multipliers Arranged in Columns with Adjacent LABS

Embedded

Multiplier

Embedded

Multiplier

Column

1 LAB

Row

Table 1-1: Number of Embedded Multipliers in the MAX 10 Devices

Device

Embedded

Multipliers

9 x 9 Multipliers

(1)

18 x 18 Multipliers

(1)

10M02

16

32

16

10M04

20

40

20

10M08

24

48

24

10M16

45

90

45

(1)

These columns show the number of 9 x 9 or 18 x 18 multipliers for each device. The total number of

multipliers for each device is not the sum of all the multipliers.

©

2014 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, ENPIRION, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are

trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as

trademarks or service marks are the property of their respective holders as described at

www.altera.com/common/legal.html

. Altera warrants performance

of its semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any

products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information,

product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device

specifications before relying on any published information and before placing orders for products or services.

ISO

9001:2008

Registered

www.altera.com

101 Innovation Drive, San Jose, CA 95134