Pilz PSSu K F INC - Manual (Page 5)

Introduction
Operating Manual PSSu K F INC
1001688­EN­06 5
1 Introduction
1.1 Validity of documentation
This documentation is valid for the product PSSu K F INC. It is valid until new documenta­
tion is published.
This operating manual explains the function and operation, describes the installation and
provides guidelines on how to connect the product.
1.1.1 Retaining the documentation
This documentation is intended for instruction and should be retained for future reference.
1.1.2 Terminology: System environment A and B
The PSSu system can be used in two different system environments. The module's applic­
ation area is described in the chapter "Intended Use" of the manual.
The distinction is made between
} PSSu in system environment A
} PSSu in system environment B
The distinction is based on the application area of the PSSu system.
PSSu in system environment A may be used in the
} Decentralised system PSSu I/O with SafetyBUS p
} Decentralised system PSSu I/O with ST fieldbuses such as CANopen, DeviceNet but
} Not in the automation system PSS 4000
PSSu in system environment B may be used in the
} Automation system PSS 4000, e.g. with the
– Decentralised system PSSu I/O with SafetyNET p
– Control system PSSu PLC
– Control system PSSu multi
1.1.3 Names for sensor connections
The sensor connections have a a different designation depending on the manufacturer. An
overview of the most frequent designation is shown in the following table.
Designation at Pilz other designations also possible
A+ Ua1+, Ua+
A­ Ua1­, Ua­
B+ Ua2+, Ua+
B­ Ua2­, Ua­
C+ Ua0+, Ua+ Z+, N+, R+
C­ Ua0­, Ua­ Z­, N­, R­
S US, UaS