Pilz PSSu E F ABS SSI - Manual (Page 30)

Technical Details
Operating Manual PSSu E F ABS SSI(­T)
1001455­EN­06 30
Mechanical data 312275 314275
Material
Bottom PC PC
Front PC PC
Coding PA PA
Mounting type plug­in plug­in
Dimensions
Height 76,0 mm 76,0 mm
Width 12,6 mm 12,6 mm
Depth 60,2 mm 60,2 mm
Weight 36 g 37 g
Mechanical coding
Type J J
Colour Yellow Yellow
The standards current on 2005­04 apply.
8.1 Safety characteristic data
Operating
mode EN ISO
13849­1:
2008
PL
EN ISO
13849­1:
2008
Category
EN IEC
62061
SIL CL
EN IEC
62061
PFH
D
[1/h]
IEC 61511
SIL
IEC 61511
PFD
EN ISO
13849­1:
2008
T
M
[year]
– PL e Cat. 4 SIL CL 3 2,61E­09 SIL 3 4,43E­06 20
If the module is operated at an ambient temperature above 60° C, the values stated in the
table for PFH
D
and PFD will need to be doubled when a safety function is calculated.
All the units used within a safety function must be considered when calculating the safety
characteristic data.
INFORMATION
A safety function's SIL/PL values are not identical to the SIL/PL values of
the units that are used and may be different. We recommend that you use
the PAScal software tool to calculate the safety function's SIL/PL values.