Pilz PSSu H SB IBSo - Manual (Page 11)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
3-1
3.1 Intended use
3 Safety
3 3000 Safety Safety 3- 3.1 Intended use 3100 Intended use 3- ][Bestimmung SB p und ST-Bus oZust
The module is designed for use in:
 Safety-related applications with
– SafetyBUS p
 Non-safety-related applications with
– INTERBUS
Bestimmung/Gertebeschreibung Kat./SIL_PSSu
The module meets the requirements of EN IEC 61508 up to SIL3 and
EN 954-1 up to Category 4.
Bestimmung/Gertebeschreibung_Ausschluss
Intended use includes making the electrical installation EMC-compliant.
Please refer to the guidelines stated in the "PSSuniversal Installation
Manual". The module is designed for use in an industrial environment. It
is not suitable for use in a domestic environment, as this can lead to in-
terference.
The following is deemed improper use in particular:
 Any component, technical or electrical modification to the module
 Use of the module outside the areas described in this manual
 Use of the module outside the technical details (see chapter entitled
"Technical Details")
Bestimm_Verwend_Info_PSSu_ab_1.4.0_Kopf FS50/18
Programmable safety systems with an older FS operating system ver-
sion will have a restricted function range.
BA_Bestimmung Ausschluss Zusatz Kopf - E-Modul
INFORMATION
The module is supported by the PSSuniversal Configurator and
PSSuniversal Assistant from Version 1.4.0. We recommend that
you always use the latest version (download from www.pilz.de).
The module is supported by programmable safety systems with
SafetyBUS p interface, from FS operating system version 50/18.