Pilz PSSu H m F DPsafe SN SD - Manual (Page 37)

Technical details
Operating Manual PSSu H m F DPsafe SN SD
1002933­EN­02 37
Environmental data 312066
Protection type
Mounting area (e.g. control cabinet) IP54
Housing IP20
Mechanical data 312066
Material
Bottom PC
Conductor cross section with screw terminals
1 core flexible 0,25 ­ 2,50 mm², 24 ­ 12 AWG
2 core with the same cross section, flexible with
crimp connectors, no plastic sleeve
0,25 ­ 1,00 mm², 24 ­ 16 AWG
2 core with the same cross section, flexible without
crimp connectors or with TWIN crimp connectors
0,20 ­ 1,50 mm², 24 ­ 16 AWG
Torque setting with screw terminals 0,50 Nm
Connection type Spring­loaded terminal, screw terminal
Mounting type plug­in
Conductor cross section with spring­loaded terminals:
Flexible with/without crimp connector
0,20 ­ 2,50 mm², 24 ­ 12 AWG
Stripping length 9 mm
Dimensions
Height 125,6 mm
Width 130,0 mm
Depth 83,7 mm
Weight 405 g
The standards current on 2009­07 apply.
9.1 Safety characteristic data
Operating
mode EN ISO
13849­1:
2008
PL
EN ISO
13849­1:
2008
Category
EN IEC
62061
SIL CL
EN IEC
62061
PFH
D
[1/h]
IEC 61511
SIL
IEC 61511
PFD
EN ISO
13849­1:
2008
T
M
[year]
– PL e Cat. 4 SIL CL 3 4,14E­09 SIL 3 3,51E­05 20
All the units used within a safety function must be considered when calculating the safety
characteristic data.
INFORMATION
A safety function's SIL/PL values are not identical to the SIL/PL values of
the units that are used and may be different. We recommend that you use
the PAScal software tool to calculate the safety function's SIL/PL values.