Pilz PNOZ m ES CANopen - Manual (Page 7)

Overview
Operating Manual PNOZ m ES CANopen
1002699­EN­03 7
2 Overview
2.1 Unit structure
2.1.1 Scope of delivery
} Expansion modulePNOZ m ES CANopen
} Jumper 779 260
2.1.2 Unit features
Using the product PNOZ m ES CANopen:
Expansion module for connection to a base unit from the configurable control system
PNOZmulti 2 .
The product has the following features:
} Can be configured in the PNOZmulti Configurator
} Connection for CANopen
} Station addresses from 0 ... 99, selected via rotary switch
} Transmission rate selected via rotary switch (1 MBit/s, 10 kbit/s, 125 kBit/s, 20 kbit/s,
250 kBit/s, 50 kbit/s, 500 kBit/s, 800 kbit/s)
} Status indicators for communication with CANopen and for errors
} 128 virtual inputs and outputs on the control system PNOZmulti 2 can be defined in the
PNOZmulti Configurator for communication with the fieldbus CANopen.
} Max. 1 PNOZ m ES CANopen can be connected to the base unit
} Plug­in connection terminals:
either spring­loaded terminal or screw terminal available as an accessory (see order
reference)
} Please refer to the document "PNOZmulti System Expansion" for details of the base
units PNOZmulti 2 that can be connected.