Pilz PNOZ ms1p standstill / speed monitor - Manual (Page 41)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
9-1
9 Application Examples
9 9000 Application Examples Application Examples 9-
Safe standstill monitoring
Configuration in the PNOZmulti Configurator
` Standstill: depending on requirement
` Speed n1: greater than the maximum permitted speed.
If the "Overspeed" output (see red marking) = "0", either the maximum
permitted speed has been exceeded or the speed monitor has recog-
nised a fault.
"Overdrive" output = "0" must lead to the shutdown of the relevant axis.