Xblue Networks X-2020 - Manual (Page 75)

XBLUE Networks 75
Web Programming
Netw
ork P
ag
e
6
Network Page
The network page is used to manually enter the telephone’s network addresses
Network
•
Network Type - There are three network types DHCP, Static and PPPoE.
•
DHCP - When set to DHCP, the X-25 system will automatically assign the telephone’s IP Address (as
seen above)
•
Static - When set to Static, you will have to enter the IP Address manually.
Static IP
•
Enter the specific IP Address to be used for this telephone, followed by the
Subnet Mask, Default Gateway, and primary, secondary, and third DSN for
the network.