Xblue Networks X-2020 - Manual (Page 63)

XBLUE Networks 63
Telephone Programming
Get
ting Started
5
Once completed Press the left navigation button
Select “2. Phone Number”
Enter your extension telephone number
Press the center navigation key
Press the down navigation key and select “3. Display Name”
Enter the name to be displayed when you are ringing another extension
Press the center navigation key
Press the down navigation key “4. Authentication”
Press the center navigation key
Press the center navigation key to select “Authorized ID”
Enter the Extension’s ID - this could be a number or a name
Press the center navigation key
Press the down navigation key to select “Authorized Password”
Press the center navigation key
Enter the Extension’s Password - this could be a number or a name or a string of numbers and letters
Press your left navigation key until it asks if you want to exit Administration.
Select “Yes” to exit Admin
At this time you will have to reboot the telephone.
When the phone reboots, it will connect to the X-25 and will be operational. This programming can be done at the
office, so that when the phone is plugged it at the remote location, it will come on line automatically.