Xblue Networks X-2020 - Manual (Page 31)

XBLUE Networks 31
Using your Telephone
Plac
ing a
call
3
Redial
Redial stores the last 30 numbers that you dialed. Press the redial
button and then use the down navigation button to find the
desired telephone number.
Press the center navigation button to dial the selected telephone number
Message
Button
Use the message button to pick up new messages. You will know
that you have a new message when the light bar at the top of the
display is flashing. When checking voicemail messages, you will
have to enter your mailbox password.
Conference
There are two types of conference, supervised and unsupervised.
A supervised conference is when the initiator (the person creating
the conference) remains in the conference. An unsupervised
conference is when the initiator (the person creating the
conference) disconnects from the conference.
Use the following steps to create a conference
•
While on a call press the hold button
•
Press the down navigation key. This will open a
second communications path, allowing you to place a
second internal or external call.
•
Dial the desired telephone number
•
after the second call is answered and you are ready to
establish the conference, press the conference
button, and you and the other two parties will be
joined in a single conversation.
Volume Button
Each X2020 telephone comes with a volume adjust bar, which is
used to increase (press up) or decrease (press down) the volume.
For example, when the telephone is ringing, press up to increase
or down to decrease the volume of ring.
When speaking on the handset, press up to increase or down to
decrease the volume of the handset, etc.
TABLE 3.2 Basic Op erations
Op eration Desc rip tion