Turning Technologies WorkSpace - Manual (Page 6)

WorkSpace for PC 6
3 Enter the required information in the fields provided and click Submit.
Checking for Software Updates
Periodically, Turning Technologies releases software updates. Follow the steps below to check for WorkSpace updates.
1 Click the Main Menu icon on the toolbar, mouse over Help and select Check for Updates.
NOTE
If Check for Updates is gray in color, the most up-to-date version of WorkSpace is installed.
Setting Up WorkSpace Connect
The Turning Technologies Device Manager must be installed on your computer prior to using WorkSpace Connect.
WorkSpace Connect turns your tablet into an interactive mobile whiteboard that is compatible with most Android and iPad
tablets.
NOTE
Using WorkSpace Connect is optional. Skip this task if you do not want to use the WorkSpace Connect
app.
1 Open WorkSpace.
2 Click the Main Menu icon on the toolbar and select Preferences.
The WorkSpace Preferences window opens.
3 Click the Tablet Settings tab.
4 Check the box labeled Allow Tablet Connection.
5 Enter the Host Name and Password in the boxes provided.
6 Click Save/Update to save your changes, and click OK to close the Preferences window.
Next Steps
Download and install the WorkSpace Connect app for your tablet from the appropriate app store. See the WorkSpace Connect
User Guide for Technical Requirements and instructions on how to use the app.
Setting Up MobiView
The Turning Technologies Device Manager must be installed on your computer prior to using the MobiView. The MobiView
communicates with Turning Technologies software through the wireless MobiView receiver. The receiver is a USB device
stored in the charging stand or on the backside of the MobiView.
1 Turn on the classroom computer on which WorkSpace is installed.
2 Insert the Mobi receiver into a USB port on the classroom computer. The blue LED on the Mobi receiver will light up.
NOTE
If a USB hub is needed, you must ensure that you use a powered USB hub.
3 Turn on the MobiView by pressing the blue Power button on top of the unit.
The message Attempting to Connect is displayed on the MobiView screen.
einstruction.com/workspace-overview